Build Day(s) is when all your hard work and preparation pays off and the fun part begins.
Registration area. Set up a registration table so that all volunteers can sign in (and perhaps sign liability waivers) and get name badges. Volunteers should then be directed to the individuals responsible for the playground installation supervision. You can use the "sign in" list to send thank you's after the build.
Supervision. Your play equipment representative or installation supervisor(s) should be responsible for taking control of the construction activities on build day. They will break volunteers up into teams and assign tasks throughout the build.
Assembly. The play equipment will be assembled mostly in the post holes. Once each item is leveled and plumb, concrete can be placed into the footer holes and mixed with water. When the installation of the equipment is complete, the equipment should be caution taped and/or fenced with barrier fence until the concrete is set, usually within 48 hours.
Safety Surface. If the safety surfacing is being placed by volunteers, it will need to be installed once the concrete is in the post holes. The safety surfacing must be in place before any children are allowed to enter the play area. Any swing chains and seats should only be installed after the safety surfacing installation is complete.
Caution. No young children should be allowed in the area during the Playground Installation-Build Day, as there will likely be open holes and other hazards present.
Breaks and water. During Build Day schedule breaks for lunch or refreshments for your volunteers and be sure that there is plenty of drinking water available.
How long will it take? Most of our groups, with proper preparation, are able to build a playground in one day. Of course, a very large project may take more than one day to install the playground equipment and any safety surfacing.